The maximum height of the grass for the lawn mower is 30 cm. The maximum height of the grass for the drum mulcher is 60 cm.

The average time for the Slopehelper to change the row is 1 min. 30 sec.

The speed varies from 2 km/hour for spraying to 5 km/hour for lawn mower. In general, the speed depends on the quality of the soil (for power harrowing) and the height of the grass.

Slopehelper weighs 1750 kg.

The weight of the hinged equipment varies from 150 kg to 500 kg.

Yes.

Yes. It is necessary to perform geometrical modelling of the plantation before the first use of the Slopehelper. The model is uploaded to the on-board computer and is used for navigation during lifetime of the plantation.

With only one hinged equipment attached, the minimum space for a turn needed is 6.0 meters.
With hinged equipment attached to both the front and the rear part of the vehicle the minimum space for a turn needed is 8.0 meters.

The maximum slope angle for the Slopehelper to work effectively on slopes is 42°.

Yes.

Yes. The Slopehelper produces constant pulling force of 20 kN.

Yes, the Slopehelper works on terraces if there is enough space to make a turn and change the row.

The base station is part of the differential GNSS system that together with radars and sensors allows the Slopehelper to work precisely on a plantation.

If an object is detected in front of the Slopehelper, it stops and waits for 15 minutes for the object to remove. If the object is detected for more than 15 minutes, the Slopehelper switches to a brake mode and sends a message via TeroAir mobile application.